3D Laser Scanning Services in Ohio

As an architecture, engineering, or construction professional, you understand that projects require a tremendous amount of planning and coordination. GPRS 3D Laser Scanning can deliver accurate as-builts, point clouds, 2D CAD drawings, 3D photogrammetry, and 3D BIM models to expedite project planning and reduce change orders, delays, and costs.

Whether you are a general contractor or facility manager planning renovations or modifications, or an architect or engineer who requires precise project data, GPRS provides accurate existing conditions documentation, reality capture, and scan-to-BIM services to bring your design and construction projects in on time, and on budget.

When you need accurate architectural, structural, and MEP system dimensions, locations, and layouts for design, prefabrication, clash detection, facility modifications, or asset management, call GPRS. 3D laser scanning minimizes shutdowns and disruptions, eliminates the need for site revisits, and provides accurate as-built data to reduce risk and increase project efficiency.
Request A QuoteSchedule Service
A man in a hard hat holding a tablet.

Cincinnati 3D Laser Scanning

513-609-7244laser@gprsinc.com

Cleveland 3D Laser Scanning

216-470-7262laser@gprsinc.com

Columbus 3D Laser Scanning

614-800-0378laser@gprsinc.com

Toledo 3D Laser Scanning

419-843-7226laser@gprsinc.com

GPRS Project Managers

GPRS is the leading provider of 3D laser scanning services in Ohio. Our Project Managers document your site with the Leica ScanStation P-Series and the Leica RTC360 3D laser scanners, capturing up to 2 million data points per second with 2-4 millimeters accuracy. Each Project Manager completes the most extensive training program in the industry, with 80 hours of hands-on classroom training and 320 hours of mentorship in the field, plus another 40 hours of LiDAR training to deliver expertise in 3D laser scanning equipment and field knowledge.

Request A QuoteSchedule Service
A 3D image of a factory with pipes and valves.A drawing of a road with a red line on it.A 3D drawing of a building with a staircase.

GPRS Mapping & Modeling Team

Construction drawings and models streamline planning, visualization, and coordination on your project because they provide a single source of truth for designers, architects, engineers, and contractors. GPRS’ in-house Mapping & Modeling Team can customize as-built data, 2D CAD drawings, 3D BIM models, 3D mesh models, virtual tours via WalkThru 3D, digital twins, floor plans via FLRPLN, and more to ensure you have all the information you need to get the job done right, delivered via GPRS’ SiteMap® digital storage software and app.
‍
Maps and models can be produced at any level of detail in a variety of formats such as Revit, AutoCAD, ReCap, Navisworks, Civil 3D, BIM360, A360, Bentley, Leica Cyclone, Cintoo, and more. We have optimized workflows for importing data, registration, creating deliverables, quality checks, and transferring data to clients.

Not sure what you need? Not a problem. Our experienced Project Managers will work closely with you to define the project scope and use the right equipment and software to accurately map and model your project to accomplish your goals.

WHY CHOOSE US? 

THE GPRS DIFFERENCE.

With GPRS, clients can rest assured that our rigorously trained Project Managers use state-of-the-art technology to deliver the accurate as built information you need to do the job right. GPRS leads the industry to deliver precise as built information to enhance communication and collaboration among your project teams.

GPRS 3D Laser Scanning Services can bring these benefits to your project:

  • Collect up to two million data points per second with the highest-quality survey-grade laser scanners
  • Capture exact dimensions and measurements of your project site
  • Expedite planning and design with accurate as-builts
  • Eliminate site disruption and revisits
  • Receive precise point clouds, 2D drawings, and 3D models to improve collaboration and coordination
  • Tour the location, add digital notes, and even measure with a virtual tour
  • Reduce project risks, change orders, delays, accidents, and costs
Request A QuoteSchedule Service
GPRS main Logo: Intelligently Visualizing the built world | GPRS

GPRS 3D Laser Scanning Services in Ohio

A blue and white drawing of a building with a lot of wires.
As-Built Services
As-built services capture exact architectural, structural, and MEP system dimensions and layout of existing buildings, facilities, and sites, making them invaluable for design, construction, renovations, and modifications.
Learn More
A green and blue image of a factory with pipes and valves.
Point Clouds
3D laser scanners record highly accurate digital measurements of sites and assets in the form of a point cloud and can be used to create 2D CAD drawings and 3D BIM models that improve project workflows, shorten turnaround times, and reduce costs.
Learn More
A 3D model of a building with a staircase.
3D BIM Modeling
Intelligent 3D Building Information Models (BIM) provide contractors, engineers, architects, and facility managers an accurate digital twin of buildings and infrastructure to collaborate on design, construction, and operations.
Learn More
A picture of a building with a red circle in the middle.
3D Photogrammetry
3D rendered images can be used to create virtual tours, floorplans, topographic maps, point clouds, 3D models, and more for planning, analysis, and calculations.
Learn More
A drawing of a building with a red roof and a green roof.
2D CAD Drawings
GPRS can translate 3D laser scan data into 2D CAD drawings that provide your team with up-to-date floor plans, elevations, sections, details, isometric drawings, reflected ceiling plans, and more.
Learn More
A red pipe with a blue wire running through it.
Clash Detection
3D laser scanning captures as-built site conditions with 2-4 mm accuracy, helping to identify potential clashes, prefabricate components, and plan a flawless installation.
Learn More
A 3D drawing of a church with a steeple.
Design-Build
3D laser scanning provides accurate as-built site data to prevent expensive rework by identifying any mistakes early in the design through the construction phase.
Learn More
A stadium seating chart with a red line on the field.
Drone Imagery
GPRS offers rectified photogrammetry, aerial video and images, LiDAR scans, 2D orthomosaic images, CAD drawings, 3D models, and 3D fly throughs thanks to a wide-range of drone services operated by FAA Licensed pilots.
Learn More
Request A QuoteSchedule ServiceNationwide Directory

///INDUSTRIES We serve

Construction, Remodel & Design-Build

Architectural

Engineering

Historical

Facilities

Healthcare & Pharmaceutical

Water & Sewer

Oil & Gas

Education

Stadiums & Theatres

Agricultural

Multimedia & Entertainment

We provide 3D Laser Scanning Services to these Ohio counties & many more:

  • Franklin County
  • Cuyahoga County
  • Hamilton County
  • Summit County
  • Montgomery County
  • Lucas County
  • Butler County
  • Stark County
  • Lorain County
  • Warren County

‍

Our portfolio of work includes projects in these Ohio cities & many more:

  • Columbus, Ohio
  • Cleveland, Ohio
  • Cincinnati, Ohio
  • Toledo, Ohio
  • Akron, Ohio
  • Dayton, Ohio
  • Parma, Ohio
  • Canton, Ohio
  • Mandon, Ohio
  • Lorain, Ohio
  • Hamilton, Ohio

‍

3D Laser Scanning Aids In Hotel Renovation

Capturing basic structural and architectural features will immensely help the architect in planning the hotel renovations.
A hotel developer plans to invest $30 million to renovate a 200-room hotel in downtown Toledo, Ohio. GPRS performed laser scanning services to aid this client in the renovation. GPRS 3D laser scanned the exterior elevation, basement, main lobby level, 2nd floor and elevator shaft – more than 30,000 square feet of space. All structural and architectural features were captured as part of the scan.
A hotel developer plans to invest $30 million to renovate a 200-room hotel in downtown Toledo, Ohio.
A hotel developer plans to invest $30 million to renovate a 200-room hotel in downtown Toledo, Ohio. Case Study: 3D Laser Scanning Aids In Hotel Renovation Location: Toledo, Ohio TASK: A hotel developer plans to invest $30 million to renovate a 200-room hotel in downtown Toledo, Ohio. GPRS performed laser scanning services to aid this client in the renovation. GPRS 3D laser scanned the exterior elevation, basement, main lobby level, 2nd floor and elevator shaft – more than 30,000 square feet of space. All structural and architectural features were captured as part of the scan. PROBLEM: No accurate as-built drawings existed. It would have been difficult, costly and time consuming to manually measure the 19-story building. The developer was not local, making transportation and lodging an added expense. Safety was also a concern, as the building was partially demolished and contained asbestos. SOLUTION: GPRS quickly mobilized to the site and captured the existing conditions of the hotel. Using a P40 survey-grade Leica ScanStation, the local GPRS Project Manager tied the data to survey control, achieved 2-4mm accuracy, and mitigated movement, ensuring level scans. The client received .rcs Intensity Map Point Cloud files, 2D AutoCAD Floor Plans, 2D Point Cloud Sheets, a 3D Revit 2017 LOD 100 Model and TruViews. To save costs and expedite this project, only the unique floors of the hotel were laser scanned. Capturing the basic structural and architectural features will immensely help the architect in planning the hotel renovations. Laser scanning quickly captured precise data while avoiding the risk of the unsafe environment. GPRS collected all building information, eliminating the need to return to the site for additional measurements. For 3D laser scanning of hotels and other resort properties, contact GPRS. GPRS Intelligently Visualizes The Built World® for customers, nationwide. What can we help you visualize? GPRS 3D laser scanned the exterior elevation, basement, main lobby level, 2nd floor and elevator shaft – more than 30,000 square feet of space. GPRS CAD designers developed a 3D Revit 2017 LOD 100 Model for the client to plan the renovation. Point cloud of 2nd floor. LOD 100 Model close-up of basement and 1st floor beams. Detail of exterior wall dimensions. 3D model closeup of northwest stairwell.
All
3D Laser Scanning
3D Laser Scanning
Mapping & Modeling

Laser Scanning to Design Seating in Arena Theatre

GPRS provided laser scanning services for the Arena Theatre in Houston, Texas. The client desired to replace the current seating and did not have accurate drawings. The primary objective was to capture the existing dimensions of the seating, ramps, stairs, floor and stage area. The client requested the raw scan data to design the new layout of the seats.
GPRS provided laser scanning services for the Arena Theatre in Houston, Texas, where the client desired to replace the current seating.
Meta Title: Laser Scanning to Design Seating in Arena Theatre Meta Description: GPRS provided laser scanning services for the Arena Theatre in Houston, Texas, where the client desired to replace the current seating. Header: Case Study: Laser Scanning to Design Seating in Arena Theatre Alt Tag: A 3D laser scanner sitting inside a theater. Caption: GPRS provided laser scanning services for the Arena Theatre in Houston, Texas. Alt Tag: Theater seating. Caption: The primary objective was to capture the existing dimensions of the seating, ramps, stairs, floor, and stage area. Alt Tag: A 3D laser scanner in a dark theater. Caption: Using the Leica HDS7000 Ultra-High-Speed Laser Scanner with Extended Range, the GPRS Project Manager captured the existing conditions and delivered point cloud data to the client. Alt Tag: Theater steps. Caption: GPRS provided the highest quality laser scan data in the shortest period of time. Location: Houston, Texas Task: GPRS provided laser scanning services for the Arena Theatre in Houston, Texas. The client desired to replace the current seating and did not have accurate drawings. The primary objective was to capture the existing dimensions of the seating, ramps, stairs, floor and stage area. The client requested the raw scan data to design the new layout of the seats. Challenge: The client has a remote laser scanner; however, due to inclement weather, could not make the flight to Houston. With a full concert schedule and a limited window of opportunity to laser scan, the client contacted GPRS to handle this project for them. Solutions: Since GPRS offers nationwide service, a Project Manager (PM) quickly mobilized to the site to perform laser scanning. Using the Leica HDS7000 Ultra-High-Speed Laser Scanner with Extended Range, the PM captured the existing conditions and delivered point cloud data to the client the next day. Deliverables: GPRS delivered raw scan data (.zfs files) to the client. No registration was required for this project. Added Value: GPRS worked quickly to provide laser scan data to the client, allowing them to begin designing the new seating for the Arena Theatre. The client trusted GPRS to provide the highest quality laser scan data in the shortest period of time. GPRS Intelligently Visualizes The Built World® to keep your projects on time, on budget, and safe. What can we help you visualize? Click below to schedule a service or request a quote today!
All
3D Laser Scanning
3D Laser Scanning
Mapping & Modeling

GPRS 3D Laser Scans The Kennedy Space Center

The Kennedy Space Center used GPRS 3D laser scanning services during recent upgrades to Launch Complex 39B. Our client was installing piping from the mechanical room under the launch pad up to the surface where they terminate, rerouting overhead piping through the mechanical room, as well as, removing and installing new equipment. GPRS delivered accurate and reliable as-built data for the Kennedy Space Center to plan upgrades and reroute piping.
The Kennedy Space Center used GPRS 3D laser scanning services during recent upgrades to Launch Complex 39B.
The Kennedy Space Center – Cape Canaveral, Florida 3D BIM Model to Upgrade Launch Complex 39B ‍ TASK: The Kennedy Space Center used GPRS 3D laser scanning services during recent upgrades to Launch Complex 39B. Our client was installing piping from the mechanical room under the launch pad up to the surface where they terminate, rerouting overhead piping through the mechanical room, as well as, removing and installing new equipment. GPRS delivered accurate and reliable as built data for the Kennedy Space Center to plan upgrades and reroute piping. ‍ CHALLENGE: The client needed fast and accurate as built documentation of the project areas so they could effectively plan upgrades and piping routes and note any clash points. Understanding exactly where the mechanical room equipment was located below the launch pad surface was crucial to this project and difficult to determine using a method other than 3D laser scanning. ‍ SOLUTION: The GPRS Mapping & Modeling Team delivered an LOD 300 3D BIM model of the structural and MEP details. Accurate information helped the client plan for the equipment and piping and determine the vertical penetration points. This saved time and money by prefabricating the piping offsite and minimizing rework from misaligned pipes and equipment.
All
3D Laser Scanning
3D Laser Scanning
Mapping & Modeling

We Have Two Ways To Request An Online Quote:

  1. If you are familiar with Laser Scanning, fill out the form below
  2. If you are new to Laser Scanning, click here for more detailed prompts

GPRS
INTELLIGENTLY VISUALIZING THE BUILT WORLD®

Request a QuoteSchedule Service