3D Laser Scanning Services in Wyoming

GPRS provided 3D laser scanning services for six parking lot structures at the Dallas Fort Worth International Airport, ranging from 500 to 2,500 square feet in plan area. The client wanted accurate dimensional information to prefabricate replacement canopies for each of the structures.

GPRS provided 3D laser scanning services for six parking lot structures at the Dallas Fort Worth International Airport, ranging from 500 to 2,500 square feet in plan area

Dallas Fort Worth International Airport – DFW Airport, Texas Prefabrication of Canopies for Parking Lot Structures ‍ TASK: GPRS provided 3D laser scanning services for six parking lot structures at the Dallas Fort Worth International Airport, ranging from 500 to 2,500 square feet in plan area. The client wanted accurate dimensional information to prefabricate replacement canopies for each of the structures. ‍ CHALLENGE: The client needed accurate information to design replacement fabric panels, including the location of the attachment plates and fasteners. They requested a quick turnaround on this project, GPRS expedited deliverables within 15 working days of the purchase order. ‍ SOLUTION: Dimensions were quickly verified in these high traffic areas of the airport with a Leica laser scanner. GPRS’ Mapping & Modeling Team created an LOD 200 Revit 3D model including basic structural elements, such as exposed structural columns and joists, grade and canopy. With the 3D model, the following details could be used to expedite prefabrication and installation - elevations, plan dimensions, radii of rolled elements, plus locations and dimensions of all attachment hardware.

All

3D Laser Scanning

3D laser scanning will help this Andersons’ facility optimize processes and equipment to improve their overall efficiency, decrease air pollution, reduce costs, and remain competitive in the market.

GPRS was hired by TLF Engineers to 3D laser scan the exterior cooler area at the southeast corner of The Andersons’ Indiana Ethanol Plant and create a 3D BIM model for process improvements.

GPRS was hired by TLF Engineers to 3D laser scan the exterior cooler area at the southeast corner of The Andersons’ Indiana Ethanol Plant and create a 3D BIM model for process improvements.

Ethanol Plant Upgrades to Increase Efficiency and Lower Emissions ethanol plant model TruePoint.png “We were extremely impressed with GPRS in your timeliness on responding to our request, to having a crew on site to complete the scan, and in your communication with us through the process. This was the first time we have used GPRS modeling services, and the 3D model your team created was outstanding. We were very impressed with the level of detail and quality of the model, the speed in which your team was able to create it, and all aspects of communication during the process.” TLF Engineers’ Senior Project Engineer Seth A.R. Gressley, P.E. Location: Clymers, Indiana Task: GPRS was hired by TLF Engineers to 3D laser scan the exterior cooler area at the southeast corner of The Andersons’ Indiana Ethanol Plant and create a 3D BIM model for process improvements. Project Application: 3D laser scanning collects accurate agricultural as-built data safely from the ground, delivering precise site layout and dimensions for design planning and analysis. Problem: The Andersons’ planned to make process improvements over the next five years to improve operational efficiency and lower plant emissions TLF Engineers needed up-to date as-builts of the plant infrastructure to design upgrades to equipment and production lines Precise details were required for a 2,500 sq. ft. area, including the existing cooler, drop box, dust collectors, platforms, cooler, stack, and ductwork Solution: 3D laser scanning captured a colorized point cloud with 2-4mm accuracy and HDR images in less than 3 minutes per scan location The point cloud was used to develop a 3D BIM model at a very high level of detail with precise architectural, structural, and MEP features TruView 360° photographs provided a virtual site tour, allowing the client to take basic dimensions, estimate clearances, and markup the project site. Benefits: Comprehensive data of existing structure and equipment was crucial to plan process improvements and equipment optimization With a detailed 3D BIM model, the engineering team was able to virtually design the facility layout, retrofit equipment and optimize workflow Updates improved ethanol yield and quality, increased production efficiency, and lowered plant emissions

All

3D Laser Scanning

Raw point cloud data provided an engineering firm in California the accurate measurements they needed to design and plan the expansion of a water treatment facility in Texas thanks to 3D laser scanning

Capture accurate existing conditions and provide raw as-built, point cloud data for the expansion of a water treatment plant

An engineering firm was generating construction drawings to expand an existing water treatment plant. The firm required accurate field conditions in raw point cloud data (.rcp files and related supporting files) to create new layouts for construction.

No as-built drawings existed for the water treatment plant. Accurate existing conditions were needed to plan for the facility expansion • Exact dimensions were required to plan modifications and fabricate pipe • The project's engineering firm was located in California; the water treatment plant was located in Texas. They needed accurate information available in a digital platform to begin design planning Solution • Using a Leica Scan Station, a GPRS Project Manager completed 40 laser scans of the building to capture architectural, structural, and MEP features • The client received a colorized point cloud in ReCap (.rcp files and related supporting files) and TruView files that allowed the engineering firm and the plant to coordinate off-site planning and prefabrication for the expansion Benefits Laser scanning is an extremely efficient and accurate way to gather data necessary to create construction drawings of a building or space. • 3D laser scanning eliminated the firm's travel to the Water Treatment Plant. In one day on site, enough scans were taken to create a complete colorized point cloud of the space. • 3D laser scan data provided the Engineering Firm critical tie points on tanks and lines, information that was crucial to the expansion.

All

3D Laser Scanning