3D Laser Scanning Services in Washington

GPRS’ accurate measurements allowed the client to order dimensionally-correct windows for each specific opening, thus reducing any change orders for this project. The client can review the 6-story building and its openings in 3 separate deliverables: the point cloud, the 2D drawings, and the TruViews.

To capture the dimensions of all the window openings on the building.

GPRS captured the accurate dimensions of the window openings safely from the ground.

Location: Detroit, Michigan Task: To capture the dimensions of all the window openings on the building. Challenge: The building was a 6-story building with windows on all four sides. The height alone of a 6-story building can create enough challenges when obtaining accurate measurements of window dimensions. This project, however, presented additional challenges. For example, the exterior of the building was not easily accessible by lift or scaffolding due to its being located along a busy road with minimal right of way. Additionally, the other sides of the building also had obstacles which further limited access to the windows. Solutions: By utilizing laser scanning, a non-contact measurement tool, GPRS was able to capture the accurate dimensions of the window openings safely from the ground, as well as from other safe locations. Windowsills can sometimes be difficult to capture when scanning from the ground, but our scan technicians were able to set up on and scan from surrounding buildings and rooftops to ensure enough elevation to capture these features accurately for our client. And since laser scanning is not only safe and accurate, but also is extremely fast, the field work was limited to one day. Deliverable: GPRS provided our client with 2D elevations in AutoCAD, which included the dimensions of the edge of existing rough openings dictated by the limestone cladding. Additionally, we supplied our client with TruViews – 3D photographs overlaid on top of the point cloud, allowing for rudimentary measurements directly from the photos. The client can now view the building and its openings in 3 separate deliverables: the point cloud, the 2D drawings, and the TruViews. Added Value: Many times, in field measuring, there is an assumption made, after measuring several similar units, that others will likely be of the same dimensions. With laser scanning we can easily and accurately determine the dimensions of each opening individually. As is common with many older buildings, many of the openings of this building appeared to be the same size but, in fact, varied enough to cause potential problems. GPRS’ accurate measurements allowed the client to order dimensionally-correct windows for each specific opening, thus reducing any change orders for windows that did not fit perfectly the first time they were placed.

All

3D Laser Scanning

In less than two hours on site, GPRS 3D Laser Scanning captured all aboveground features and utility field markings that were then used to provide integrated above and below-ground plan view of the campus via 2D CAD drawings to plan HVAC upgrades, and have accurate existing condition documentation for future use

A Los Angeles, California high school required 3D laser scanning of the above ground and below ground infrastructure to create 2D CAD drawings and plan for HVAC system upgrades throughout the campus

In less than two hours on site, GPRS 3D Laser Scanning captured all aboveground features and utility field markings that were then used to provide a integrated above and below-ground plan view of the campus via 2D CAD drawings to plan HVAC upgrades, and have accurate existing condition documentation for future use.

Problem • A 12-year-old high school was replacing the piping on 16 HVAC units throughout the campus. • The piping for these units runs intricately in and out of buildings, and through retaining walls and mechanical yards. • The areas that the pipes thread through do not have any as-builts or existing plans. Solution • Using the Leica RTC360 laser scanner, a Project Manager captured elements of the surrounding campus and GPR markings in less than hours on site • This project was laser scanned in full color, allowing the client to easily visualize and identify structural elements, pipes, conduits, and concrete reinforcement points inside the point cloud • CAD engineers created 2D AutoCAD floor plans and exterior elevations, PDFs with and without the point cloud overlayed Benefits • The combination of laser scanning structural and ground penetrating radar markings provided the client a high definition 3D comprehensive view of the campus, including both visible and invisible elements • With 3D laser scan data, the client can verify the HVAC mechanical equipment with confidence knowing high accuracy instruments minimize position error throughout the 3D space • The client has the most up-to date, accurate and comprehensive information to design HVAC upgrades

All

3D Laser Scanning

With 3D laser scan data, the client can accurately verify the existing HVAC and mechanical equipment within the building without having to worry about positioning or measurement error. This helps them to design their new systems more accurately and efficiently.‍

3D scanning services were performed for a 10-story office building, capturing existing above-ceiling interstitial HVAC systems on each floor, as well as mechanical rooms, chiller rooms, air handling unit rooms and a basement tunnel connecting the utility area to the office building. Over 240,000 square foot of space was laser scanned to document the as-is conditions. The client was upgrading the HVAC system and GPRS developed a 3D model to aid the design process and reduce clashes.

With the 3D laser scan data collected by GPRS, the client could accurately verify the existing HVAC and mechanical equipment within the building.

Location: Toledo, Ohio Task: 3D scanning services were performed for a 10-story office building, capturing existing above-ceiling interstitial HVAC systems on each floor, as well as mechanical rooms, chiller rooms, air handling unit rooms and a basement tunnel connecting the utility area to the office building. Over 240,000 square foot of space was laser scanned to document the as-is conditions. The client was upgrading the HVAC system and GPRS developed a 3D model to aid the design process and reduce clashes. Challenge: With the site being an active office building, it was critical that the required lidar scanning data was obtained with minimal interruptions. Accuracy was important and the space was vast, they needed complete documentation to plan for system upgrades, including above the acoustic tile that was to remain in place. Solutions: Using the RTC360 and P40 Leica 3D laser scanners, GPRS Project Managers 3D laser scanned the interstitial and mechanical space in the evenings to avoid interrupting the office workday. A laser scanner mounted to a tripod was extended above the ceiling tiles to capture the interstitial space. With the 3D laser scan data, the client can accurately verify the existing HVAC and mechanical equipment within the building without having to worry about positioning or measurement error. This enables them to design their new systems more accurately and efficiently. Deliverable: GPRS delivered point cloud data in .rcs file format usable in Autodesk products (Revit, AutoCAD, Navisworks, etc.) so the client can align and overlay the point cloud to their existing 3D Revit model to verify the location of large format ductwork located in the interstitial space. GPRS also provided a 3D model of the mechanical rooms, chiller rooms, air handling unit rooms and basement tunnel. An LOD 100 model of the structural space and an LOD 300 of the MEP space was delivered to the client. Added Value: GPRS customizes deliverables for each client, so they are only paying for what they need. Also, upon completion of the HVAC system upgrade and prior to ceiling tiles being installed, GPRS will re-mobilize to the site to capture the new as-built conditions of the space for future reference.

All

3D Laser Scanning