3D Laser Scanning Services in Michigan

In less than two hours on site, GPRS 3D Laser Scanning captured all aboveground features and utility field markings that were then used to provide integrated above and below-ground plan view of the campus via 2D CAD drawings to plan HVAC upgrades, and have accurate existing condition documentation for future use

A Los Angeles, California high school required 3D laser scanning of the above ground and below ground infrastructure to create 2D CAD drawings and plan for HVAC system upgrades throughout the campus

In less than two hours on site, GPRS 3D Laser Scanning captured all aboveground features and utility field markings that were then used to provide a integrated above and below-ground plan view of the campus via 2D CAD drawings to plan HVAC upgrades, and have accurate existing condition documentation for future use.

Problem • A 12-year-old high school was replacing the piping on 16 HVAC units throughout the campus. • The piping for these units runs intricately in and out of buildings, and through retaining walls and mechanical yards. • The areas that the pipes thread through do not have any as-builts or existing plans. Solution • Using the Leica RTC360 laser scanner, a Project Manager captured elements of the surrounding campus and GPR markings in less than hours on site • This project was laser scanned in full color, allowing the client to easily visualize and identify structural elements, pipes, conduits, and concrete reinforcement points inside the point cloud • CAD engineers created 2D AutoCAD floor plans and exterior elevations, PDFs with and without the point cloud overlayed Benefits • The combination of laser scanning structural and ground penetrating radar markings provided the client a high definition 3D comprehensive view of the campus, including both visible and invisible elements • With 3D laser scan data, the client can verify the HVAC mechanical equipment with confidence knowing high accuracy instruments minimize position error throughout the 3D space • The client has the most up-to date, accurate and comprehensive information to design HVAC upgrades

All

3D Laser Scanning

With 3D laser scan data, the client can accurately verify the existing HVAC and mechanical equipment within the building without having to worry about positioning or measurement error. This helps them to design their new systems more accurately and efficiently.‍

3D scanning services were performed for a 10-story office building, capturing existing above-ceiling interstitial HVAC systems on each floor, as well as mechanical rooms, chiller rooms, air handling unit rooms and a basement tunnel connecting the utility area to the office building. Over 240,000 square foot of space was laser scanned to document the as-is conditions. The client was upgrading the HVAC system and GPRS developed a 3D model to aid the design process and reduce clashes.

With the 3D laser scan data collected by GPRS, the client could accurately verify the existing HVAC and mechanical equipment within the building.

Location: Toledo, Ohio Task: 3D scanning services were performed for a 10-story office building, capturing existing above-ceiling interstitial HVAC systems on each floor, as well as mechanical rooms, chiller rooms, air handling unit rooms and a basement tunnel connecting the utility area to the office building. Over 240,000 square foot of space was laser scanned to document the as-is conditions. The client was upgrading the HVAC system and GPRS developed a 3D model to aid the design process and reduce clashes. Challenge: With the site being an active office building, it was critical that the required lidar scanning data was obtained with minimal interruptions. Accuracy was important and the space was vast, they needed complete documentation to plan for system upgrades, including above the acoustic tile that was to remain in place. Solutions: Using the RTC360 and P40 Leica 3D laser scanners, GPRS Project Managers 3D laser scanned the interstitial and mechanical space in the evenings to avoid interrupting the office workday. A laser scanner mounted to a tripod was extended above the ceiling tiles to capture the interstitial space. With the 3D laser scan data, the client can accurately verify the existing HVAC and mechanical equipment within the building without having to worry about positioning or measurement error. This enables them to design their new systems more accurately and efficiently. Deliverable: GPRS delivered point cloud data in .rcs file format usable in Autodesk products (Revit, AutoCAD, Navisworks, etc.) so the client can align and overlay the point cloud to their existing 3D Revit model to verify the location of large format ductwork located in the interstitial space. GPRS also provided a 3D model of the mechanical rooms, chiller rooms, air handling unit rooms and basement tunnel. An LOD 100 model of the structural space and an LOD 300 of the MEP space was delivered to the client. Added Value: GPRS customizes deliverables for each client, so they are only paying for what they need. Also, upon completion of the HVAC system upgrade and prior to ceiling tiles being installed, GPRS will re-mobilize to the site to capture the new as-built conditions of the space for future reference.

All

3D Laser Scanning

3D laser scanning will help this Andersons’ facility optimize processes and equipment to improve their overall efficiency, decrease air pollution, reduce costs, and remain competitive in the market.

GPRS was hired by TLF Engineers to 3D laser scan the exterior cooler area at the southeast corner of The Andersons’ Indiana Ethanol Plant and create a 3D BIM model for process improvements.

GPRS was hired by TLF Engineers to 3D laser scan the exterior cooler area at the southeast corner of The Andersons’ Indiana Ethanol Plant and create a 3D BIM model for process improvements.

Ethanol Plant Upgrades to Increase Efficiency and Lower Emissions ethanol plant model TruePoint.png “We were extremely impressed with GPRS in your timeliness on responding to our request, to having a crew on site to complete the scan, and in your communication with us through the process. This was the first time we have used GPRS modeling services, and the 3D model your team created was outstanding. We were very impressed with the level of detail and quality of the model, the speed in which your team was able to create it, and all aspects of communication during the process.” TLF Engineers’ Senior Project Engineer Seth A.R. Gressley, P.E. Location: Clymers, Indiana Task: GPRS was hired by TLF Engineers to 3D laser scan the exterior cooler area at the southeast corner of The Andersons’ Indiana Ethanol Plant and create a 3D BIM model for process improvements. Project Application: 3D laser scanning collects accurate agricultural as-built data safely from the ground, delivering precise site layout and dimensions for design planning and analysis. Problem: The Andersons’ planned to make process improvements over the next five years to improve operational efficiency and lower plant emissions TLF Engineers needed up-to date as-builts of the plant infrastructure to design upgrades to equipment and production lines Precise details were required for a 2,500 sq. ft. area, including the existing cooler, drop box, dust collectors, platforms, cooler, stack, and ductwork Solution: 3D laser scanning captured a colorized point cloud with 2-4mm accuracy and HDR images in less than 3 minutes per scan location The point cloud was used to develop a 3D BIM model at a very high level of detail with precise architectural, structural, and MEP features TruView 360° photographs provided a virtual site tour, allowing the client to take basic dimensions, estimate clearances, and markup the project site. Benefits: Comprehensive data of existing structure and equipment was crucial to plan process improvements and equipment optimization With a detailed 3D BIM model, the engineering team was able to virtually design the facility layout, retrofit equipment and optimize workflow Updates improved ethanol yield and quality, increased production efficiency, and lowered plant emissions

All

3D Laser Scanning