Natural gas is used for heating, hot water and cooking among other uses. Pipes carrying natural gas can range in size and material. Most piping used for natural gas lines is made of conductive material, making it more easily identifiable in a GPR scan.
Gas lines are among the most dangerous buried utilities. Gas leaks can occur with even the smallest amount of damage, and are not always easy to identify since natural gas is odorless, tasteless, and colorless. It’s typically laced with a compound that gives it its distinctive Sulphur smell for identification. A damaged gas line can lead to gas buildup within the area, but can also back up further down the line. Gas is highly flammable and something as small as a spark from a cellphone could lead to a major explosion. When dealing with potential gas leaks it’s important to immediately evacuate the area in order to prevent death or injury.
GPRS is skilled at using ground penetrating radar (GPR) to locate all types of buried utilities. The GPR equipment sends a signal into the ground, bouncing off of buried material to create a reading. This reading is used to determine approximate location of the utility or material in question. Ground penetrating radar a non-destructive solution to locating buried utilities.
GPRS Project Managers undergo rigorous training and are top in the field of private utility location. However, it is not always easy to distinguish between different types of utility readings. If there are any doubts about the type of material located, the signal can be traced back to its source- in this case a potential gas line could be traced back to a meter. If there is still confusion about the type of utility, the elevation of the buried utility is cross-checked with any existing plans. It is our job to take the guess work out of your excavation and we do everything possible to ensure that this happens.
GPRS project managers are skilled at using GPR equipment to identify the location of buried utilities. We have an accuracy within 6 inches to the center of the utility, and a depth accuracy at +/- 10-15%.
Our Project Managers will walk you through their findings, ensuring you have a clear understanding of the location of buried sewer lines. All findings are carefully marked out on site- we typically use spray paint and markers for projects which are underway. A detailed GPS plan or AutoCAD drawing can be compiled in order to preserve this information for future use.
Note: GPRS does not provide geophysical, geological, land surveying or engineering services. If you need such services, please contact an appropriate professional.