3D Laser Scanning Services in Illinois

GPRS saved the GC untold labor hours and cost overruns by detecting clashes, finding deviations before they caused expensive rework, and discovering the buried slab.

Complete subsurface mapping and millimeter-accurate aboveground measurements for a top-down, 360° visualization of a hospital wing and parking area to support a hospital expansion.

The addition is designed to occupy an existing parking lot for hospital employees, patients, and visitors. GPRS performed utility locating, video pipe inspection, and 3D laser scanning to create a comprehensive map and 3D model of the medical center’s infrastructure, both above and below ground.

TASK: Complete subsurface mapping and millimeter-accurate aboveground measurements for a top-down, 360° visualization of a hospital wing and parking area to support a hospital expansion. PROJECT APPLICATION: Rudolph Libbe, a longtime GPRS client and partner, oversaw the construction on the expansion of a northwest Ohio medical center. The addition is designed to occupy an existing parking lot for hospital employees, patients, and visitors. GPRS performed utility locating, video pipe inspection, and 3D laser scanning to create a comprehensive map and 3D model of the medical center’s infrastructure, both above and below ground. PROBLEM SOLUTION BENEFITS n Rudolph Libbe received millimeteraccurate laser scan data and an integrated 3D BIM model to precisely design and plan the building addition during preconstruction. n Non-destructive utility-locate methods reduced the number of unknown utilities and obstructions for the design and construction teams. n GPRS’ as builts allowed Rudolph Libbe to plan the new foundation and identify areas where further investigation would be warranted to prevent design and utility clashes. n With comprehensive field services provided by GPRS, Rudolph Libbe saved time and money on change orders, and eliminated subsurface damage during the construction process. With parts of the medical center’s campus dating back to the mid- 1800s, inaccurate as built data and unknown subsurface obstructions could jeopardize construction planning. n It was imperative that the proposed locations of the structural foundation and planned utilities coordinated with the existing conditions. n Rudolph Libbe desired 3D as builts to plan and complete the building addition, such as structural and utility tie-in information. n Traditional exploration methods typically include “soft” excavation methods over the entire building footprint. This option is expensive, time consuming, and requires tremendous coordination. GPRS utilized ground penetrating radar (GPR) and electromagnetic (EM) locating to map the hospital’s utilities. n Video pipe inspection (VPI) recorded the precise location and condition of the facility’s sewer lines, detailed in a NASSCO-certified report. n 3D laser scanning documented as built site data and utility maps to create 2D CAD drawings and a 3D BIM model for virtual design and construction. n GPRS participated in coordination meetings with construction and design team members. NO ONE HAS GONE TO THIS EXTENT TO MAP A SITE ABOVE AND BELOW GROUND. IT WAS IMPERATIVE THAT RUDOLPH LIBBE HAD ACCURATE AS BUILT SITE DATA AND UTILITY MAPS WITH CRITICAL STRUCTURAL AND UTILITY TIE-IN INFORMATION.” JAIME ALTHAUSER | FIELD SUPPORT DIRECTOR, GPRS

All

3D Laser Scanning

In less than two hours on site, GPRS 3D Laser Scanning captured all aboveground features and utility field markings that were then used to provide integrated above and below-ground plan view of the campus via 2D CAD drawings to plan HVAC upgrades, and have accurate existing condition documentation for future use

A Los Angeles, California high school required 3D laser scanning of the above ground and below ground infrastructure to create 2D CAD drawings and plan for HVAC system upgrades throughout the campus

In less than two hours on site, GPRS 3D Laser Scanning captured all aboveground features and utility field markings that were then used to provide a integrated above and below-ground plan view of the campus via 2D CAD drawings to plan HVAC upgrades, and have accurate existing condition documentation for future use.

Problem • A 12-year-old high school was replacing the piping on 16 HVAC units throughout the campus. • The piping for these units runs intricately in and out of buildings, and through retaining walls and mechanical yards. • The areas that the pipes thread through do not have any as-builts or existing plans. Solution • Using the Leica RTC360 laser scanner, a Project Manager captured elements of the surrounding campus and GPR markings in less than hours on site • This project was laser scanned in full color, allowing the client to easily visualize and identify structural elements, pipes, conduits, and concrete reinforcement points inside the point cloud • CAD engineers created 2D AutoCAD floor plans and exterior elevations, PDFs with and without the point cloud overlayed Benefits • The combination of laser scanning structural and ground penetrating radar markings provided the client a high definition 3D comprehensive view of the campus, including both visible and invisible elements • With 3D laser scan data, the client can verify the HVAC mechanical equipment with confidence knowing high accuracy instruments minimize position error throughout the 3D space • The client has the most up-to date, accurate and comprehensive information to design HVAC upgrades

All

3D Laser Scanning

Architects and mechanical contractors could plan both the demolition of the existing systems and the implementation of the new systems without jeopardizing the Frank Lloyd Wright Unity Temple's aesthetics and spatial design.

To laser scan both the interior and exterior of Frank Lloyd Wright’s Unity Temple and produce a 3D BIM model for historical renovation documentation.

GPRS laser scanned the interior and exterior of Frank Lloyd Wright’s Unity Temple to produce a 3D BIM model for historical renovation documentation.

Location: Unity Temple in Oak Park, Illinois Task: To laser scan both the interior and exterior of Frank Lloyd Wright’s Unity Temple and produce a 3D BIM model for historical renovation documentation. Challenge: The challenge in this case was to be able to thoroughly document the 1909 Frank Lloyd Wright masterpiece—in order to prepare for a multi-million dollar building restoration—without compromising the building’s historical identity or disrupting ongoing tourism and church activities within Unity Temple. Solutions: Building Information Modeling (BIM) has become a major practice within the AEC industry, specifically for new construction, adaptive reuse, or buildout projects. But how does this practice of “build twice” translate to restoring an early 19th century architectural marvel? By means of High Definition Surveying (HDS). HDS is a non-contact measuring tool that collects visible information of existing conditions in a fast, precise way while, at the same time, reducing damage risks and time associated with traditional measuring methods. Visible information is captured in 360 degrees, generating a 3D point cloud with accuracy up to 2 to 4mm. These point clouds ultimately become 3D virtual worlds of the building, making the method a fast and cost effective way to generate as-built documentation (both 2D and 3D) for project analysis and coordination. In the case of Unity Temple, TruePoint was hired for its expertise in historical preservation by means of laser scanning and BIM modeling. TruePoint’s team of architects and engineers performed a comprehensive laser scan of the building’s interior (temple, offices, mechanical basement, classrooms, etc.), exterior, roof, and skylights in order to capture explicit detail of Unity Temple’s current condition. TruePoint then created a 3D Revit model from the point cloud data so that the construction management firm and subcontractors (mechanical contractors, concrete restoration, architects, etc.) could investigate the building’s existing state and accurately assess their project designs for restoring Unity Temple. Deliverables: Deliverables included a 3D Revit model of the building’s interior, exterior, roof, and skylights; a colorized point cloud in Autodesk Recap file formats (.rcp/.rcs) to be used directly in Autodesk Software (Revit, AutoCAD, Navisworks, etc.); and TruView photographs. Added Value: The colorized point cloud generated from laser scanning gave explicit detailed information that would be otherwise nearly impossible or extremely difficult to document without risking damage to the fragile building elements. Examples of two key architectural features are the intricate window panes (e.g., clerestories, skylights) and the wood trim throughout Unity Temple. Both of these features were collected in the point cloud data in congruence with other building information (structure, mechanical systems, etc.). Additionally, TruePoint trained the client on how to create 2D elevations, sections, and a Reflected Ceiling Plan (RCP) directly from the point cloud data within AutoCAD. These AutoCAD sheets contained precise measurements and photographs, making it quick and easy for the client to identify the exact piece and location of each element for its removal, restoration, and re-implementation. TruePoint also provided the client with TruViews. The TruView utilizes a free plug-in for Internet Explorer in order to view each scan location from the scanner’s perspective. This offers a quick, easy way to take rudimentary measurements, make hyperlink notes, and perform project collaboration, thereby reducing the hassle, time, and cost associated with on-site visits. Another added bonus of producing a comprehensive point cloud and BIM model of Unity Temple was documenting the existing mechanical room and tunnel in relation to the entire structure. Mechanical contractors and architects could then plan both demolition of the existing systems and implementation of the new systems without jeopardizing Frank Lloyd Wright’s aesthetic and spatial design.

All

3D Laser Scanning