Ground Penetrating Radar Systems Inc.

Concrete Analysis & Locate - San Diego, California

Concrete Analysis California

Ground Penetrating Radar Systems, Inc. was contacted by a large contractor in San Diego to locate rebar, post-tensioned cables, and conduits prior the core drilling. Ground Penetrating Radar Systems, Inc. used a 1600 MHz GPR antenna to perform the scan. The findings were marked directly on the surface with spray paint as seen in the picture above. This enabled the contractor the confidence and knowledge to continue with their core drilling.

We use the latest ground penetrating technology to provide critical information on utilities, materials, and other potential obstructions within existing structures or underground. Fast and reliable, GPRS provides both two- and three-dimensional images of the scanned areas without delivering any radiation. All of our equipment is registered and meets all standard FCC regulations.

Utilizing GPR reduces risk and cost, promotes a safe work environment, and provides non-destructive testing by locating materials such as concrete, plastic, metal, steel, and pavement. Our client base includes hospitals, universities, surveyors, engineers, homeowners, contractors, environmentalists, and excavators.

Contact GPRS Project Manager James Petersen at:

Phone: 760-574-0436
Email: james.petersen@gprsinc.com


Ground Penetrating Radar Scan Performed in High Rise Apartments - San Diego, CA

Ground Penetrating Radar Systems, Inc. - GPRS - of Southern California was contacted by a plumbing company in order to scan for rebar, post tension cables, or conduits in a concrete deck prior to coring (1) 3” hole for a new drain location. We scanned 2’x2’ areas for the location and we marked all findings on the surface with spray paint. In the areas scanned, we found that the slab was roughly 6” thick and consisted of one layer rebar at 12” on center.

GPR scanning is a great tool to use to locate post tension cables, rebar, and conduits. It can also be used to scan for underground utilities prior to excavating or directional boring. GPRS has offices throughout the entire state of California and performs projects in cities such as; Murrieta, Menifee, Temecula, Escondido, El Cajon, La Mesa, El Centro, Palm Springs, San Diego, North County, Inland Empire, and San Clemente. Please contact James Petersen at 760-574-0436 or by email at james.petersen@gprsinc.com to schedule service, obtain a quote, or to learn more about ground penetrating radar and how GPRS can assist in your projects.

Concrete Analysis Locate - San Diego, California
The above photo shows the area scanned, with the layout of rebar located painted in orange.



Back To Top

Ground Radar Scanning
Forms YouTube LinkedIn Blog Twitter Facebook Contact Us Privacy Policy Disclaimer Forms Past GPR Projects About Us