Ground penetrating radar (GPR) was used at a CNC shop in Pennsylvania to determine the reinforcement layout within the slab and to identify the radiant heat piping within the slab. The company was going to be installing machinery that would be anchored through the floor. Ground Penetrating Radar was used during the day while normal operations were tacking place and had no los of production. The picture below shows the antenna that was used to collect the data. The Red lines marked directly onto the surface represent the steel reinforcement and the Orange lines indicate where there is a radiant heat line within the slab.
Ground penetrating radar (GPR) was used at a CNC shop in Pennsylvania to determine the reinforcement layout within the slab and to identify the radiant heat piping within the slab. The company was going to be installing machinery that would be anchored through the floor. Ground Penetrating Radar was used during the day while normal operations were tacking place and had no los of production. The picture below shows the antenna that was used to collect the data. The Red lines marked directly onto the surface represent the steel reinforcement and the Orange lines indicate where there is a radiant heat line within the slab. 